WRAP TODAY.  SAVE TOMORROW.

ERS WRAP™ INSULATION BLANKETS:
STRAINERS, MANWAY COVERS,
BLIND FLANGE COVER & PUMP COVERS

 

ERS Wrap™ Blanket Industrial Insulation is a Multipurpose, Removable and Reusable Industrial Blanket Insulation Made of Fiberglass Insulated Fabric For Use in Mechanical Industrial Insulation For Insulating High Temperature Processes.

ABOUT
ERS WRAP™ BLANKET INSUALTION FOR BLIND FLANGES, MANWAY COVERS, STRAINER AND PUMP COVERS 

ABOUT:  ERS Wrap™ is a multipurpose sewn industrial insulation blanket that can be used to insulate virtually any hot mechanical part up to approximately 400°.  Our industrial insulation blankets will significantly reduce surface temperatures, providing personnel protection and saving you money!  

APPLICATIONS:  ERS Wrap™ blanket insulation circular covers can be used on any circularhot mechanical component.  

MATERIAL SPECS:  The insulation blanket rolls are made using a silicone impregnated fiberglass fabric, and lined with temp mat.  Temp mat is a fiberglass needled insulating fabric suitable for high temperatures. Click the below button to learn more about the materials used to fabricate ERS Wrap™. 

 
ERS IMG_4702.HEIC-min.png
ERS IMG_3779.HEIC-min.png
ERS IMG_4713.JPEG-min.jpeg

SIZING
ERS WRAP™ BLANKET INSUALTION FOR BLIND FLANGES, MANWAY COVERS, STRAINER AND PUMP COVERS 

We have insulated thousands of hoses and in-line pipes using our ERS Wrap™ fiberglass insulation blanket rolls.  The width of the roll depends on the diameter of the pipe or hose being insulated.  

WHAT WE NEED TO KNOW

OUTSIDE DIAMETER
 

LENGTH OF DROP
 

ADJOINING COMPONENT

DIAMETER:  We need to know the OD of the circular component such as a blind flange, manway cover, strainer or pump cover. 

LENGTH:  Determine how many inches you'd like the drop.  The "drop" is the piece of insulation that is sewn to the circular blanket.   Remember, it's always better to go large!

ADJOINING PARTS: The best thing to do is send us a picture of what you're trying to insulate and we can make a recommendation!  

 

INSTALLING
ERS WRAP™ BLANKET INSUALTION FOR BLIND FLANGES, MANWAY COVERS, STRAINER AND PUMP COVERS 

TOOLS/SUPPLIES NEEDED:  Cable tie tensioners, cable ties, staple gun, staples, and caulk.

1.  Set the cover on the blind flange, manway cover, strainer, pump or other circular component, and using stainless steel cable ties, draw the insulation in.

2.  Depending on the size of the bonnet or pump/strainer can be covered using an ERS Wrap Small cover or ERS Wrap blanket insulation roll.  If there are ajoining hoses, pipes or levers, you may need to cut the blanket insulation. 

3.  Sealing the cuts in blanket insulation:  fold the insulation under creating a field fabricated finished edge and staple.  You may choose to apply silicone caulk where the insulation was cut to inhibit the entry of water.

 

Request a Free Quote!

arrow&v
arrow&v
Thanks for submitting!

We'd love the opportunity to earn your business. 

 

Request a quote and we will get back to you in record speed!  We may need to ask you for more information, please let us know the best way to communicate with you!